Engrave a bottle gourd with your S1 40W!

lindsey.jain avatar
lindsey.jain
·
4
348
Design Files (1)
  • bottle gourd.xcs
    S1

    • Summary

    A dried-out and hollowed bottle gourd can be engraved on the S1 40W! To do so, lay the gourd on the honeycomb tray and use a towel to support it arond its edges and cushion the gourd so it will not move. Then, select the settings for kraft boxes (engrave) and voila! I used a drill to cut the hole (didn't want the laser to cut through both sides of the gourd).

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    40W
    Material used
    Kraft Gift Box
    Home-grown from our garden with the intent to design home for the birds!
    Total time
    15 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.

    Setting

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?