Retro Pride Magnet

MachWärk avatar
MachWärk
·
26
307
Design Files (1)
  • Retro Pride Magnet.xcs
    F1
    • Edited 2025/03/05

    Summary

    I have a friend that recently came out - and made a couple of magnets for his fridge!

The paint job is not looking great close up  and enlarged - but nobody see that when it is on the fridge.

Made out of 3 mm Birch Plywood, too thick posca's and varnished.

*PERSONAL USE ONLY *

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool F1
    10W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool F1
    xTool P2S
    55W
    xTool M1
    5W, 10W
    xTool S1
    10W, 40W, 20W
    xTool F1 Ultra
    20W
    xTool M1 Ultra
    10W, 20W
    xTool P2
    55W
    xTool D1 Pro
    5W, 10W, 20W, 40W
    Material used
    3mm Birch Plywood
    Plywood bought at Amazon.de Posca and matte varnish Magnet from the local hobby shop
    Total time
    10 min

    Setting

    Setting 1
    Setting 2

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts