HomeTemplatesToys & Games & ModelsModels
ron
Report
[Laser cut and engrave] Bee Model
Project made with xTool D1 machine for Laser cut and engrave.
Project made with xTool D1 machine for Laser cut and engrave.
[Laser cut and engrave] Bee Model
Project made with xTool D1 machine for Laser cut and engrave.
[Laser cut and engrave] Bee Model
Project made with xTool D1 machine for Laser cut and engrave.
[Laser cut and engrave] Bee Model
[Laser cut and engrave] Bee Model
[Laser cut and engrave] Bee Model
[Laser cut and engrave] Bee Model
[Laser cut and engrave] Bee Model
[Laser cut and engrave] Bee Model

Bee Model

Bee1.svg
Bee1
.svg
Application scenario
Laser (60min)
Machine & module
xTool D1
10W
Material used
1/8"(3mm) Basswood Plywood
4323
29354

Information

      Easy little model to burn and put together. I downloaded this from the creator who offers it as a free file. I made adjustments to all of the joints because the were irregular and a sloppy fit. I made them for 3mm basswood that I get from Amazon, that is actually just smaller than 3mm.
Comments

Remixes

xTool Supplies Used in This Template

xTool D1
xTool D1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood