Inkjet pad Holder for Honeycomb
Captfarris
·
17
526
Design Files (1)
  • inkjet-pad-holder-for-honeycomb.xcs
    M1Ultra
    • Description
    While the screw helps keep it in position, I found it still moves around due to the slight height difference. I designed this simple two piece holder that works in tandem with the screw to keep the inkpad in position. It is two pieces glued together. It's designed to fit in the space between the machine and the plastic bracket for the honeycomb(see last photo).
    Production Info
    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool M1 Ultra
    10W
    Material used
    2 mm Basswood
    2mm Basswood is needed. I don't advise using thicker wood because of where it needs to fit into. Set process mode by layer top to bottom. This ensures the notches get cut first. My settings are with air assist, please adjust as needed for your machine and setup.
    Total time
    1.21 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    Setting
    License
    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.
    Do you like this project?