Description
Made a Santa Gnome on a swing. Used the M1 Ultra to make the print, then cut it out with the P2. Attached the bottom part to the feet of the Gnome and attached the rope through the holes on both sides of the bottom part. Then glued the rope on the back side of the hands and slit the rope through the holes on the smaller piece of wood and made knots on the bottom part and the top part, so the wood would not slide. Then took both ends of the rope and made a knot,
Production Info
Instruction
Not included
Application scenario
Laser
Software
xTool Creative Space
Machine & processing module
xTool M1 Ultra
20W
Material used
3mm Basswood Plywood
xTool Basswood and M1 Ultra ink, rope and glue
Total time
30 min
Also compatible with other machines. Visit the Material EasySet Library for more.
Setting
Tags
License
This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.