Report
Summer Vibes
Bingo Party
InstructionSummer Vibes
.xcs
Application scenario
Laser
Machine & module
xTool S1
40WMaterial used
3mm Basswood Plywood A4
37
311
Information
A quick little project to celebrate summer that features 6 panels stacked on top of each other that can be cut from one 12" X 12" (300mm X 300mm) sheet of 3mm plywood. Each panel measures 5.5" X 3.5" (139.7mm X 88.9mm). Assemble the panels with glue or foam tape for more spacing between the layers. Ready to paint or display as is.
Instruction
1
Step1: Add material to your laser.
Preview
Add the material to your laser.
2
Step2: Remove the cut panels from the laser.
Preview
Removed the cut panels from the laser.
3
Step3: Assemble the panels, start with the back panel.
Preview
Start the assembly with the back panel.
4
Step4: Add the next panel (water).
Preview
Add the water panel.
5
Step5: Add the next panel (beach).
Preview
Add the beach panel.
6
Step6: Add the next panel (trees).
Preview
Add the trees panel.
7
Step7: Add the next panel (chairs).
Preview
Add the chairs panel.
8
Step8: Add the final panel (Summer Vibes).
Preview
Finish the assembly with the top panel and enjoy.
Comments
Remixes
xTool Supplies Used in This Template