Viking embossed coin

mathieu.mercky avatar
mathieu.mercky
·
420
1878
Design Files (2)
  • Viking.xcs
    F1Ultra
  • Viking COin.png
    • Edited 2025/02/14

    Summary

    This is a little project for brass coins.

The original picture was made with MidJourney, then transformed in grayscale file on DepthR.

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool F1 Ultra
    20W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool F1 Ultra
    xTool D1 Pro
    2W
    xTool F1
    2W
    xTool S1
    2W
    Material used
    Brass coin
    The model shown on the picture was embossed on a 25 mm diam brass coin (2mm thick) You can upscale for larger coins You also need to add 1 or 2 clean passes after the embossing (make a round on all the coin, 100% power IR / 5000 mm/s) Then grind the surface with steel whool.
    Total time
    120 min

    Setting

    Setting 1
    Setting 2

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts