Engrave Test on Slate Coaster
Laser Craft
·
678
3203
Design Files (1)
  • Material Engrave Grid Test.xcs
    S1
    • Description
    I purchased slate coasters from Amazon and wanted to know the best setting to engrave. I did not want to waste coasters, so I set up a test grid. I kept finding "How-tos" on how to setup a test grid. I wanted to post the design file I made so you don't have to make your own. I would imagine you can use this on any material. You may want to resize it to fit whatever you are testing.
    Production Info
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    40W
    Material used
    Slate coaster
    I used Eccliy slate coasters purchased from Amazon. (ASIN: B0BNQD6914). I have attached the link as well. The coasters come with foam feet on the backs. They are fairly thin, but have held up so far. https://www.amazon.com/dp/B0BNQD6914?psc=1&ref=ppx_yo2ov_dt_b_product_details
    Total time
    13 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    License
    CC BY-NC
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.
    Do you like this project?