2W IR1064 Storage Box with hinged lid

mbc123112 avatar
mbc123112
·
166
811
Design Files (1)
  • S1 20W for 2W IR1064 3mm Basswood Storage Box with hinges.xcs
    S1
    • Edited 2025/04/01

    Summary

    I made this 2W IR1064 Storage Box with hinged lid that uses the foam insert from the cardboard box that it was shipped in to keep it with my other accessories that i have reorganized. I screened grabbed the image for the Module so its not the best but at least you know what's in the box. I made the box with boxes.py(i love that site..very easy and fun to just play around with..) After finishing the box it looked to plain so i decided to play around with images. The zipper eye didn't turn out as well as i wanted(too dark) but i already engraved it on the box. I adjusted the image and tried again on a scrap piece and it turned out a lot better but i wasn't going to recut it. All part of figuring it out..

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    20W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool P2S
    55W
    xTool P2
    55W
    xTool F1 Ultra
    20W
    xTool M1 Ultra
    10W, 20W
    xTool D1
    5W, 10W, 20W
    xTool M1
    5W, 10W
    xTool S1
    10W, 40W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool F1
    10W
    Material used
    3mm Basswood Plywood
    3mm basswood from Amazon.
    Total time
    60 min

    Setting

    Setting 1
    Setting 2
    Setting 3
    Setting 4
    Setting 5

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts