Just Cluck It small sign

FishingPilot avatar
FishingPilot
·
52
339
Design Files (1)
  • Sign_Cluck_It_xtool_upload.xcs
    M1
    • Edited 2025/03/11

    Summary

    This project was my first attempt to combining pieces together to create a sort of inlay. The same pattern is cut from two different types of wood (xTool Ebony MDF and xTool Basswood) with a backing board (xTool MDF).

    Production Info

    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool M1
    10W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool D1
    5W, 10W, 20W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool M1
    5W
    xTool S1
    10W, 20W, 40W
    xTool F1 Ultra
    20W
    xTool P2
    55W
    xTool F1
    10W
    xTool M1 Ultra
    10W, 20W
    xTool P2S
    55W
    Material used
    3mm Basswood Plywood
    3mm Ebony MDF Board
    3mm MDF
    xToolPrimeProjects
    All of the wood came from xTool. I used the following: 3mm Basswood (the lighter wood in the project) 3mm Ebony MDF (the darker wood in the project) 3mm MDF (the backing boards)
    Total time
    60 min

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts