S1 Accessories Storage Box

ka5yth avatar
ka5yth
·
179
1137
Design Files (1)
  • storage box - kerf added.xcs
    S1
  • Summary

    I recently purchased an S1 with the rotary tool and the UV laser module. I wanted a convenient storage box that kept the tools and extra stuff that came with the laser. This project was my test building a box. This is made with 12"x12" 3mm basswood with 0.22mm kerf built in. Designed from scratch with NanoCAD and imported into XCS. It takes six sheets of basswood and I used some wood glue. It has double-walled external walls for more support and divided internal segments to fit all the parts with room to grow. 
    
    The XCS file has labeled pieces to make assembly a little easier. Start with assembling the interior dividers and then place them on the base plate. Then, add the inner part of the outside walls. Finally, add the exterior part of the outside walls. I glued the three rails around the top to let the lid slide in and hold it down. 

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    40W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool S1
    10W, 20W
    xTool F1 Ultra
    20W
    xTool M1
    5W, 10W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool P2
    55W
    xTool F1
    10W
    xTool P2S
    55W
    xTool D1
    5W, 10W, 20W
    xTool M1 Ultra
    10W, 20W
    Material used
    3mm Basswood Plywood
    3mm 12" x 12" basswood sheets bought from Amazon
    Total time
    60 min

    Setting

    License

    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.