Glow in The Dark Engraving - xTool Projects
Glow in The Dark Engraving
7
98
0
Design Files
  • glowbike.xcs
    S1
    • Edited Apr 23,2024
    Contents
    Introduction
    Basic Information
    Settings
    Design Files
    Well it looks normal until the lights go out then it comes alive.....
    Preview
    Preview
    Preview
    2 More images
    Preview
    Preview
    Preview
    Preview
    Preview
    Settings
    Setting 1
    Process Method
    Vector Laser Engrave
    Process Material
    Transparent Acrylic
    Power(%) or Cut Pressure(g)
    95
    Pass
    1
    Speed(mm/s)
    225
    Lines per cm
    100
    Setting 2
    Process Method
    Laser Cut
    Process Material
    Transparent Acrylic
    Power(%) or Cut Pressure(g)
    100
    Pass
    1
    Speed(mm/s)
    4
    Setting 3
    Process Method
    Vector Laser Engrave
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    95
    Pass
    1
    Speed(mm/s)
    225
    Lines per cm
    100
    Setting 4
    Process Method
    Laser Cut
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    100
    Pass
    1
    Speed(mm/s)
    8
    Design Files
    glowbike.xcs
    Comp56
    XCS
    Glow in the dark
    S1 20w
    xTool
    Do you like this inspiration?
    License
    This work is licensed under
    Remixes (0)
    Add Remix
    There are no remixes yet.