Projects
Designs Forum Contests
15 x 30mm round stamping blank jig
24
335
0
Design Files
  • 15x 30mm Round Stamping blank Jig.xcs
    S1
    • Contents
    Introduction
    Basic Information
    Settings
    Design Files
    I made this I was fed up with trying to home one at a time 30mm blank at a time the hole is 30.5mm with a 20mm finger hole for poking them out and keeping the blanks cool.
Made with 3mm x 2 basswood ply scrap, big enough to be pinned and held tight on the honeycomb
3x Canvas one for back, one for front and the 3rd are both combine so they can be cut straight from and 3mm A4 Basswood ply or MDF that's required, small amount of wood glue needed, I also use G-Clamps to add a little pressure to help the wood stick.
    Basic Information is loading...
    Settings
    Setting 1
    Process Method
    Laser Cut
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    100
    Speed(mm/s)
    10
    Pass
    1
    Design Files
    15x 30mm Round Stamping blank Jig.xcs
    jig
    round
    Do you like this template?
    License
    This work is licensed under
    Remixes (0)
    Add Remix
    There are no remixes yet.