fridge magnet - xTool Projects
Preview
New
3.5"x3.5"picture engraved on wood with acrylic frame,and cutom names

Preview
Preview
Basic Information
Machine
P2
Laser Module Output Power
55W
Material Used
Acrylic,Birch Plywood,Fork,Fruit,Mask
Material Info
Materials that were used are as follow, 1/8" acrylic white and red. 1/16" birch ply, 3m double sided tape was applied too white and red acrylic prior to cutting on the P2. basic round magnet was glued using gorilla glue.
Making Time(mins)
20
Settings
Setting 1
Process Method
Laser Cut
Process Material
Acrylic
Power(%) or Cut Pressure(g)
95
Speed(mm/s)
18
Setting 2
Process Method
Bitmap Laser Engrave
Process Material
Birch Plywood
Power(%) or Cut Pressure(g)
35
Speed(mm/s)
600
Lines per cm
200
Bitmap mode
Bayer
Design Files
IMG_5496.HEIC
ValentineWeTime
Do you like this inspiration?
License
This work is licensed under
Remixes (0)
Add Remix & Win Prize
Upload your remixes for a chance to win a materials package in our weekly draw.
Hurry, this draw is for a limited time and can end at any moment.