I really like Foiled Ducks project and wanted to make one like it but a little different. I engraved then cut out the center and made a stand for it.
Thank You Foiled Duck for your great design.
Basic Information is loading...
Settings
Setting 1
Process Method
Bitmap Laser Engrave
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
40
Speed(mm/s)
180
Lines per cm
200
Pass
1
Bitmap mode
Jarvis
Setting 2
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
10
Pass
1
Other Parameters
I cut out 2 of the stands and glued them together to give more support. And remember if your wood is a different thickness adjust the slot size as needed.