Projects
Designs Forum Contests
Honeycomb Bee Mine @ValentineWeTime
19
451
0
Design Files
  • Be mine.xcs
    P2
    • Contents
    Introduction
    Basic Information
    Settings
    Design Files
    Wanted to make something different then a heart or a rose., so i came up with making a Gold mirrored acrylic Honeycomb with a Black acrylic bee, engraved then cut, words with red acrylic and a thin red plastic sheet attached to the back. The Bee and words are glued on to the honeycomb and the honeycomb sits on a gold mirrored acrylic base.
    Basic Information is loading...
    Settings
    Setting 1
    Process Method
    Laser Cut
    Process Material
    Gold mirror acrylic
    Power(%) or Cut Pressure(g)
    30
    Speed(mm/s)
    8
    Pass
    1
    Setting 2
    Process Method
    Laser Cut
    Process Material
    Red Acrylic
    Power(%) or Cut Pressure(g)
    30
    Speed(mm/s)
    10
    Pass
    1
    Setting 3
    Process Method
    Bitmap Laser Engrave
    Process Material
    Black acrylic
    Power(%) or Cut Pressure(g)
    15
    Speed(mm/s)
    100
    Lines per cm
    100
    Pass
    1
    Bitmap mode
    Jarvis
    Setting 4
    Process Method
    Laser Cut
    Process Material
    Thin red plastic sheet
    Power(%) or Cut Pressure(g)
    10
    Speed(mm/s)
    30
    Pass
    1
    Design Files
    Be mine.xcs
    ValentineWeTime
    Do you like this template?
    Remixes (0)
    Add Remix
    There are no remixes yet.