Layered 3D Cherry Wood pocket mirror - xTool Projects
Preview
Preview
Preview
New
Overall size 3.25".  Heart image was created using the Bing Image Creator and then processed for engraving using Imag-r (material setting is Norton Grayscale. I made this out of Cherry wood with a plywood spacer. Because the mirror is thinner than the plywood I cut some cardstock shims to make it even. there are separate Canvases for the Cherry and the Ply
Preview
Preview
Preview
Preview
Preview
Preview
Basic Information
Software
xTool Creative Space
Machine
D1 Pro
Laser Module Output Power
20W
Material Used
1/8" Cherry and 1/16" basswood ply
Material Info
4"x8" Craftiff Cherry Wood sheets and 1/16" Basswood ply. 3" round glass mirrors by Xuniea. FastCap 2P-10 CA glue with accelerator for wood to wood and 3M Super 77 spray adhesive for mirror and shims. All were purchased on Amazon
Making Time(mins)
30
Settings
Setting 1
Process Method
Laser Cut
Process Material
cherry wood
Power(%) or Cut Pressure(g)
100
Pass
1
Speed(mm/s)
7
Setting 2
Process Method
Bitmap Laser Engrave
Process Material
Cherry Wood
Power(%) or Cut Pressure(g)
100
Pass
1
Speed(mm/s)
90
Lines per cm
100
Bitmap mode
Grayscale
Design Files
heart mirror.xcs
ValentineWeTime
Do you like this inspiration?
Remixes (0)
Add Remix & Win Prize
Upload your remixes for a chance to win a materials package in our weekly draw.
Hurry, this draw is for a limited time and can end at any moment.