Projects
Designs Forum Contests
Personalise Fabrics with engraving
144
2015
7
Design Files
  • socks.xcs
    F1
    • Contents
    Introduction
    Basic Information
    Settings
    Design Files
    With this project you will learn that in addition to several materials such as metal, wood, acrylic, the xTool F1 and by default other xTool models can indeed engrave fabrics leaving a very nice gold engraving finish without damaging the fabric. Each fabric you use needs to be tested and the settings might be different depending on the material you are using, like cotton, polyester, etc so make sure you do a test before engraving the real thing. Suggestion here: We want some xTool merchandising! :)
    Basic Information is loading...
    Settings
    Setting 1
    Process Method
    Vector Laser Engrave
    Process Material
    Fabric
    Power(%) or Cut Pressure(g)
    80
    Speed(mm/s)
    185
    Setting 2
    Process Method
    Vector Laser Engrave
    Power(%) or Cut Pressure(g)
    80
    Speed(mm/s)
    185
    Lines per cm
    200
    Pass
    1
    Design Files
    socks.xcs
    personalized
    fabric
    engraving
    f1
    brand
    Customized
    Engraving
    Do you like this template?
    License
    This work is licensed under
    Remixes (0)
    Add Remix
    There are no remixes yet.