Welcome sign

Herb THE berT avatar
Herb THE berT
·
129
1301
Design Files (1)
  • home.xcs

    • Summary

    I took a border in XCS for engraving. i set an outline with 0.1mm for the cutting
at the 4 corners of the sign i glued a magnet.
The O from the HOME is not engraved becaus here is also a magnet.
attention wenn you glue the other magnets on the attachments that you glue it on the right side, 
On my first attempt, the attachments pushed off the shield :)

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Machine & processing module
    xTool M1
    10W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool P2
    55W
    xTool M1 Ultra
    10W, 20W
    xTool F1
    10W
    xTool S1
    10W, 20W, 40W
    xTool P2S
    55W
    xTool D1
    5W, 10W, 20W
    xTool M1
    5W
    xTool F1 Ultra
    20W
    Material used
    magnet
    3mm Basswood Plywood
    Total time
    60 min

    Setting

    License

    CC BY-NC
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.

    Do you like this project?