X-Tool S1 Material Test 3mm Basswood - xTool Projects
X-Tool S1 Material Test 3mm Basswood
242
3288
6
Design Files
  • Xtool Material Test.xcs
    • Edited Nov 4,2023
    Contents
    Introduction
    Basic Information
    Settings
    Design Files
    I made a material test for the 40w S1 laser on 3mm basswood. The file can be edited on every individual speed and power block and changed any way you see fit. This file can be used for any of the X-tool diode lasers, I just specifically used the S1.
    Preview
    Preview
    Settings
    Setting 1
    Process Method
    Vector Laser Engrave
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    10
    Pass
    1
    Speed(mm/s)
    160
    Lines per cm
    100
    Bitmap mode
    Grayscale
    Design Files
    Xtool Material Test.xcs
    Material Test pattern, Test Burn, Test File, S1 Ma
    , Engrave Test
    Do you like this inspiration?
    Remixes (0)
    Add Remix
    There are no remixes yet.