Digital Downloads
XCS *1
Description
This was cut on 1/8 inch birch plywood (3 mm), but any thickness should be ok. Completed size is about 10 inches W x 31 inches H. It can be made on smaller laser machines as well, because no piece is bigger than 11 x 11 inches. The pieces are connected using 1/8 inch white ribbon. You can also use zip ties, jump rings, etc. This project can be made on all laser machines (except maybe the F1).
Production Info
Making Time
60 min
Difficulty Level
Beginner
Instruction
Not included
Application scenario
Laser
Software
xTool Creative Space
Machine & processing module
xTool P2
55W
Material used
3mm Birch Plywood
3mm Birch plywood, Acrylic paint, Glue, 1/8 inch White Ribbon
Also compatible with other machines. Visit the Material EasySet Library for more.
Tags
License
All Products can be used for Commercial Use.