Description
We have a small business called "Clara's Trendy Designs" Got an order for 5 laser engravings of a photo.I removed background using ImagR. Using ImageR I resized to fit material and entered DPI 282 (appropriate DPI for S1 40 Watt) I then selected Marcin Bitmap mode for Wood. Image details refined by using ImagR Color Change (top right corner) and selected setting 10 for Y size (Under Light Source), 10 for Diameter, 10 for Amount and 7 for Position (under Advanced) Downloaded finished image. Then Upload into XCS. In XCS, power 50, Speed 100, 1 Pass Bidirectional, Bitmap mode Atkinson, and Lines Per CM 280. Process time 1 hour 37 minutes on a 6mm 6 in by 6 in Birch plywood. Upon completion engraving is cleaned with warm water with a small amount of Dawn dish soap and a toothbrush. Finally sprayed with thin layer of Rust-Oleum Matte Finish Clear Protective Finish.
Production Info
Application scenario
Laser
Software
xTool Creative Space
Machine & processing module
![](https://image-res.xtool.com/resource/static/xtool/mt/icon/s1.png?x-oss-process=image/resize,m_mfit,w_32,h_32,limit_0/interlace,1/format,webp)
40W
Material used
6mm Birch plywood 12 in by 12 in from Home Depot. Then laser cut into 6 in by 6 in squares.
Total time
97 min
Also compatible with other machines. Visit the Material EasySet Library for more.
License
This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.