These cute tags can be used year after year and always look great!
Basic Information is loading...
Step 1: Adding the name
Setting 1
Process Method
Laser Cut
Process Material
Cherrywood Plywood
Power(%) or Cut Pressure(g)
40
Speed(mm/s)
10
Pass
1
Setting 2
Process Method
Vector Laser Engrave
Power(%) or Cut Pressure(g)
1
Speed(mm/s)
80
Lines per cm
100
Pass
1
Before placing your material in the laser ensure that you have added the correct name to the gift tags.
Red/blue engrave
Black cut
Once names have been added place the design onto you material using the camera.
Ensure you have added the correct setting for your material. You may need to change the setting I've used for a perfect finish as all materials are different.
Step 2: Adding ribbon
Once cut wipe over with a cloth to makes sure they are clean.
I added thin leather to my tags however you can use ribbon or hessian string.
Before placing your material in the laser ensure that you have added the correct name to the gift tags.
Red/blue engrave
Black cut
Once names have been added place the design onto you material using the camera.
Ensure you have added the correct setting for your material. You may need to change the setting I've used for a perfect finish as all materials are different.
Once cut wipe over with a cloth to makes sure they are clean.
I added thin leather to my tags however you can use ribbon or hessian string.
Attach to the presents.