A cute keyring to show the places you've visited around the world
Basic Information is loading...
Step 1: Adding countries
Setting 1
Process Method
Laser Cut
Process Material
Cherrywood Plywood
Power(%) or Cut Pressure(g)
40
Speed(mm/s)
10
Pass
1
Setting 2
Process Method
Vector Laser Engrave
Process Material
Cherrywood Plywood
Power(%) or Cut Pressure(g)
1
Speed(mm/s)
80
Lines per cm
100
Pass
1

Before cutting make sure that you edit the text to change the country names. If need resize and curve the text.

Step 2: Cutting

Next place with wooden parts onto the material and cut according to your wood settings that you use for cutting and engraving. Ensure that all elements needed are set to output and the design for the acrylic ring is set to ignore.

Yellow cut

Orange engrave

Step 3

Next cut the acrylic ring. This is for placing the small circles onto.  Make sure you allow this step to be on ‘output’ and turn the other parts to ‘ignore’.

 

Ensure your settings are correct for the type of acrylic you are using.

Step 4

Once all elements are cut you can add the countries to the acrylic ring and then attach the ring to the back of the keyring. If you have a large jump ring this would work for a keyring. I didn't have a jump ring large enough at the time so used a book tassel to hold it all together. It is not pinned up on the notice board to add more countries to.

Design Files
places I've visited.xcs
30creatorschallenge
Do you like this how-to?
Remixes (0)
Add Remix
There are no remixes yet.