Place the design onto your material using the camera feature on the programme. Once happy ensure that the sizing is correct you for. I have used 4mm thick material so please be aware of this when using a different thickness of material. Check that it will work. Otherwise you will need to find a way to adapt the slot cutouts. I'm sure 3mm would work fine with this design.
Step 2: Weeding
If the cutout parts don't naturally fall out use a weeding tool to carefully remove them. Remember that the design is fragile!
Step 3
Carefully slot the top to the bottom until it is in line and able to stand independently.
Place the design onto your material using the camera feature on the programme. Once happy ensure that the sizing is correct you for. I have used 4mm thick material so please be aware of this when using a different thickness of material. Check that it will work. Otherwise you will need to find a way to adapt the slot cutouts. I'm sure 3mm would work fine with this design.
If the cutout parts don't naturally fall out use a weeding tool to carefully remove them. Remember that the design is fragile!
Carefully slot the top to the bottom until it is in line and able to stand independently.