Black acrylic cross with flowers on a wooden sign painted metallic red and 3 dabs of white paint
Basic Information is loading...
Step 1: Cut acrylic
Setting 1
Process Method
Laser Cut
Process Material
Transparent Acrylic
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
7
Lines per cm
100
Pass
1
Bitmap mode
Grayscale
Choose which cross you prefer then cut with laser. Paint round sign set aside to dry. Place your piece of acrylic down on sign and mark where your flowers will sit on sign the dab sponge in a white paint then dab in the three spots your design will be. Set sign aside and dry
After acrylic cuts apply a very light coat of glue on acrylic the press on wooden sign and apply some pressure until glue has dried
Choose which cross you prefer then cut with laser.
Paint round sign set aside to dry. Place your piece of acrylic down on sign and mark where your flowers will sit on sign the dab sponge in a white paint then dab in the three spots your design will be. Set sign aside and dry
After acrylic cuts apply a very light coat of glue on acrylic the press on wooden sign and apply some pressure until glue has dried