This is a mini set of 4 draws to organise small items on a desk or work bench. I used 4mm birch plywood and wood glue to help hold everything together.
Preview
Preview
Preview
Preview
Step 1: Arrange components in XCS and cut
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
Birch Plywood
Power(%) or Cut Pressure(g)
100
Pass
3
Speed(mm/s)
4
These draws have been designed so that all parts can be cut from A4 sized materiel. The red rectangles in the file are 200x300mm (A4) but these can be ignored or deleted if you are using a different size of materiel.
The components for the draws are on the green layer and should be cut 4 times to make the 4 draws.
Step 2: Assemble draws
Preview
Preview
The draw components should be a tight fit and may require a little force to push together.
I would recommend using wood glue when assembling the enclosure to add some extra strength.
These draws have been designed so that all parts can be cut from A4 sized materiel. The red rectangles in the file are 200x300mm (A4) but these can be ignored or deleted if you are using a different size of materiel.
The components for the draws are on the green layer and should be cut 4 times to make the 4 draws.
The draw components should be a tight fit and may require a little force to push together.
I would recommend using wood glue when assembling the enclosure to add some extra strength.