Don't have enough room to set up a full CornHole game in your office?
This desktop version is perfect to make long meetings more bearable with a Quarter!
Basic Information is loading...
Step 1: Load File
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
4
Pass
1
Setting 2
Process Method
Laser Score
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
70
Pass
1
Load basswood into machine using triangular prisms
Step 2: Cut and Score
Remember to vent to prevent smoke if doing indoors
Keep an eye on the project when cutting for safety
Step 3: Stain
Stain using 2-3 coats.
You can also add some polyurethane if you want more shiny and slick
Step 4: Assemble
Insert the legs into the bottom slots of the board so the board will sit on an angle
To plat, use a quarter to try to toss in the hole
3 points for getting into the hole 1 point for landing and staying on the board
Load basswood into machine using triangular prisms
Remember to vent to prevent smoke if doing indoors
Keep an eye on the project when cutting for safety
Stain using 2-3 coats.
You can also add some polyurethane if you want more shiny and slick
Insert the legs into the bottom slots of the board so the board will sit on an angle
To plat, use a quarter to try to toss in the hole
3 points for getting into the hole
1 point for landing and staying on the board