Step3: Cut Holes for Ribbon (Optional) in Open Plane
Step4: Paint
Step5: Glue together, Clear Coat and add optional ribbon
Design Files
I made a 16" door hanger (shown on my front door) as one of the items I plan to sell at an upcoming craft show.
Preview
Preview
Step 1: Cut the Semi-circle with Flowers
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
3mm MDF Board
MDF
Power(%) or Cut Pressure(g)
60
Pass
1
Speed(mm/s)
5
Use 12X20 MDF for cut #1
Step 2: Cut the word Welcome and Outline Next
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
3mm MDF Board
MDF
Power(%) or Cut Pressure(g)
60
Pass
1
Speed(mm/s)
5
2nd cut made on 12X20 MDF
Step 3: Cut Holes for Ribbon (Optional) in Open Plane
Preview
Preview
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
3mm MDF Board
MDF
Power(%) or Cut Pressure(g)
60
Pass
1
Speed(mm/s)
5
If you do not want to hang with a ribbon skip this step. It took 27 seconds to cut. I had to use several items to prop my circle to the correct height.
Step 4: Paint
Preview
Preview
Paint with the color scheme you like! Purple is my favorite color but I will make more with other colors.
Step 5: Glue together, Clear Coat and add optional ribbon
Use 12X20 MDF for cut #1
2nd cut made on 12X20 MDF
If you do not want to hang with a ribbon skip this step. It took 27 seconds to cut. I had to use several items to prop my circle to the correct height.
Paint with the color scheme you like! Purple is my favorite color but I will make more with other colors.
Enjoy!