Infinity Flowertopper with photo insert. - xTool Projects
Preview
Preview
New
You can put this flower topper among your bunch of flowers as a personal gift.
Preview
Preview
Preview
Preview
Basic Information
Software
xTool Creative Space
Machine
P2
Laser Module Output Power
55W
Material Used
3mm Red Acrylic Sheet(Opaque,Glossy)
Material Info
Red transparant acrylic, White Cast acrylic, Transparent overhead film, acrifix Glue
Making Time(mins)
30
Step1: Cut all the pieces with the laser.
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
Acrylic
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
30
Other Parameters
for the transparent overhead film are the setting 20% power and 50 speed

Please use the slats for the acrylic. With the honeycomb you get rebounce on the back off the acrylic.

The transparent overhead film you have to use the honeycomb due it is too thin. 

Or cut it with an plotter (xtool M1).

 

Step2: Glue the "between layer" on the flovertopper heart
Preview
Preview

Glue the “between layer” on the flowertopper heart

Step3: Glue the transparent heart on the white heart
Preview
Preview

Glue the transparent heart on the white heart. 

Step4: Glue the White Heart on the "between layer"
Preview
Preview

Glue the White Heart on the "between layer"

With the transparent down.

Step5: Glue the word "forever" on the flowertopper.
Preview
Preview

Glue the word "forever" on the flowertopper.

Then make an foto in the shape of a heart and put it in the heart.

Design Files
flowertopper-valentine.svg
ValentineWeTime
Do you like this how-to?
Remixes (0)
Add Remix & Win Prize
Upload your remixes for a chance to win a materials package in our weekly draw.
Hurry, this draw is for a limited time and can end at any moment.