A photo frame that can be given as a gift not even on Valentine's Day
Basic Information is loading...
Step 1: Finishing the product
Setting 1
Process Method
Vector Laser Engrave
Power(%) or Cut Pressure(g)
11
Speed(mm/s)
167
Lines per cm
300
Pass
1
Setting 2
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
16
Pass
1
Engrave the text you like on the wood and cut the material. In the meantime, I have printed a photo on 80gsm paper to stick in between. After the design was cut and finished, I have stuck the photo to the outer frame with push pins and cut the extra paper to stretch and fit perfectly. Then I used PVA glue and attached the photo and the back piece to the front frame.
After finished you attach the frame with the base plate using PVA glue.
Engrave the text you like on the wood and cut the material. In the meantime, I have printed a photo on 80gsm paper to stick in between. After the design was cut and finished, I have stuck the photo to the outer frame with push pins and cut the extra paper to stretch and fit perfectly. Then I used PVA glue and attached the photo and the back piece to the front frame.
After finished you attach the frame with the base plate using PVA glue.