Glasses to wear on St Patty's Day. Wood and acrylic
Basic Information is loading...
Step 1: Make your design
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
4
Pass
1
Use different shapes and use the combine function to get the curve on the ear loops. This took quite a bit of trial and error.
Step 2: Start processing.
Setting 1
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
4
Pass
1
These settings are for the wooden ones
Step 3: Glue and paint
Paint the parts then glue together
Step 4: Set design for the acrylic pair
Do the same as for the wood pair
Step 5: process and cut
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
3
Pass
4
There are 2 canvases for this project. The first is the wood and canvas 2 is the acrylic. Of course, you can use either design for either material just be sure and change your settings for that material.
Use different shapes and use the combine function to get the curve on the ear loops. This took quite a bit of trial and error.
These settings are for the wooden ones
Paint the parts then glue together
Do the same as for the wood pair
There are 2 canvases for this project. The first is the wood and canvas 2 is the acrylic. Of course, you can use either design for either material just be sure and change your settings for that material.