Make decor for your office/home. Using Acrylic, wood, patternply whatever you like
Basic Information is loading...
Step 1: Design your words for the flower
Type words you want
You will want to combine the words together. To do this you might need to make the capital letter separate and combine the words together like that. See example in pictures..
Step 2: Add the stem
I used a flower from the shapes in Xtool design. You will want to get rid of the flowers on top. To do this, add a shape that will go around the area you need removed. Then select but the flower and shape and subtract
Step 3: Combine together
You will now combine the words and stem. You need to ensure there are areas touching for the combine to work and for your decor to be structural enough to not break.
Step 4: Base
To make the base, I have used the slot sizer template that is available in Xtool.
This will allow you to measure the thickness of the material you plan to use. My acrylic was 0.13 inches. So I took a rectangle that size, I then lined it up with the bottom of the stem to make sure the width wasn't too big. Then take that box to the new page, add a heart and put that box in the middle. Select the hear and the box and hit subtract.
Step 5: Time to cut
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
4
Pass
3
Put your material into your Xtool. I'm using just black acrylic for this one.
Step 6: Assembly
Just slide your “Let Love Grow” flowers into the slot and you are good to go!
I used a flower from the shapes in Xtool design. You will want to get rid of the flowers on top. To do this, add a shape that will go around the area you need removed. Then select but the flower and shape and subtract
You will now combine the words and stem. You need to ensure there are areas touching for the combine to work and for your decor to be structural enough to not break.
To make the base, I have used the slot sizer template that is available in Xtool.
This will allow you to measure the thickness of the material you plan to use. My acrylic was 0.13 inches. So I took a rectangle that size, I then lined it up with the bottom of the stem to make sure the width wasn't too big. Then take that box to the new page, add a heart and put that box in the middle. Select the hear and the box and hit subtract.
Put your material into your Xtool. I'm using just black acrylic for this one.
Just slide your “Let Love Grow” flowers into the slot and you are good to go!