Step1: Make your design in xcs then use the outline tab to make an outline of your design elements. Now remove the elements and set the outlines to score.
Step2: Open canvas 2
Step3: Open canvas 3
Step4: Paint
Design Files
A standalone valentine to be given to someone or to use as a decoration.
Basic Information is loading...
Step 1: Make your design in xcs then use the outline tab to make an outline of your design elements. Now remove the elements and set the outlines to score.
Setting 1
Process Method
Laser Score
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
60
Speed(mm/s)
50
Pass
1
Other Parameters
Using xcs create your design.
Setting 2
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
4
Pass
1
I did this to make placement of everything easier. Then cut out the heart.
Step 2: Open canvas 2
Setting 1
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
4
Pass
1
Open canvas 2 and cut everything out
Step 3: Open canvas 3
Setting 1
Process Method
Vector Laser Engrave
Process Material
Transparent Acrylic
Power(%) or Cut Pressure(g)
70
Speed(mm/s)
50
Pass
1
Setting 2
Process Method
Laser Cut
Process Material
Transparent Acrylic
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
3
Pass
5
Engrave then cut all of your pieces.
Step 4: Paint
Paint and glue and you're done. The rose came from the shapes tab. The cupid came from https://www.vecteezy.com/free-vector/eros
I did this to make placement of everything easier. Then cut out the heart.
Open canvas 2 and cut everything out
Engrave then cut all of your pieces.
Paint and glue and you're done. The rose came from the shapes tab. The cupid came from https://www.vecteezy.com/free-vector/eros