Step2: Place wood in the M1 and align the project on the board
Step3: Cut. I used the Air assist on full power for the hearts and "L", and forgot to turn it on for the "ucas" so you can see the difference in color.
Step4: Glue the border and backing together and assemble the puzzle.
Design Files
This remix is based on
Interlocking Jigsaw Puzzle of Any Size [Week 1 Task]
Richard
My son requested a red puzzle from Santa this year. His favorite color is red and he loves hearts, so this was our solution.
The engravings are deep with a speed of 50 and power level of 70.
The cuts were the default M1 3mm basswood cut settings.
This was a combination of my design and a puzzle file from Mr. Richard found here: https://projects.xtool.com/howtos/1737
Credit to Mr. Richard's profile: https://projects.xtool.com/profile/6309
Mr. Richard, you do great work sir. Thank you for sharing and inspiring us all.
Basic Information is loading...
Step 1: Spray paint the wood and let dry
Spray paint the wood and let dry
Step 2: Place wood in the M1 and align the project on the board
Place wood in the M1 and align the project on the board
Step 3: Cut. I used the Air assist on full power for the hearts and "L", and forgot to turn it on for the "ucas" so you can see the difference in color.
Cut. I used the Air assist on full power for the hearts and "L", and forgot to turn it on for the "ucas" so you can see the difference in color.
Step 4: Glue the border and backing together and assemble the puzzle.
Setting 1
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
70
Speed(mm/s)
50
Lines per cm
100
Pass
1
Bitmap mode
Grayscale
Other Parameters
Glue the border and backing together and assemble the puzzle.
My son requested a red puzzle from Santa this year. His favorite color is red and he loves hearts, so this was our solution. The engravings are deep with a speed of 50 and power level of 70. The cuts were the default M1 3mm basswood cut settings. This was a combination of my design and a puzzle file from Mr. Richard found here: https://projects.xtool.com/howtos/1737 Credit to Mr. Richard's profile: https://projects.xtool.com/profile/6309
Mr. Richard, you do great work sir. Thank you for sharing and inspiring us all.
Spray paint the wood and let dry
Place wood in the M1 and align the project on the board
Cut. I used the Air assist on full power for the hearts and "L", and forgot to turn it on for the "ucas" so you can see the difference in color.
My son requested a red puzzle from Santa this year. His favorite color is red and he loves hearts, so this was our solution.
The engravings are deep with a speed of 50 and power level of 70.
The cuts were the default M1 3mm basswood cut settings.
This was a combination of my design and a puzzle file from Mr. Richard found here: https://projects.xtool.com/howtos/1737
Credit to Mr. Richard's profile: https://projects.xtool.com/profile/6309
Mr. Richard, you do great work sir. Thank you for sharing and inspiring us all.