Summary
Lake Rotoma, Central North Island - NZ A4 size map. Image traced through Lightburn tracing tool the cleaned up in LB using nodes tool. Engraved layer made from 3mm poplar core plywood Cut: Sp 450 - Pw 100% - Pass: 2 (20W D1) Engrave: Sp 2000 - Pwr 20% - Pass 1 (5W D1)
Production Info
Application scenario
Laser
Software
Lightburn
Machine & processing module
20W
Material used
Poplar Core Plywood for the top layer - 20w D1:
Cut Spd: 450 - Pwr: 100% - Pass: 3
Eng Spd: 2000 - Pwr: 20% - Pass: 1
2mm Poplar for the lower layers - D1 5w
Cut Spd: 200 - Pwr: 100% - pass 4
Hard card for the below layers - 5w D1:
Cut Spd: 200 - Pwr:100%
Total time
35 min
Also compatible with other machines. Visit the Material EasySet Library for more.