I show how I design a backer for Christmas ornaments to protect from damage and give a professional look for customers. Basic ornament shape shown also included. 
5 More images
Basic Information is loading...
Step 1: Start with ornament of choice. Add rounded square, resize
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
90
Speed(mm/s)
7
Pass
1
Other Parameters
Using air assist

I start with any ornament I just made, and add a rounded square from xcs shapes, I resize to 7x5 and duplicate. One is the back, you can make 3 if you want a cover like a book. I select the ornament and click outline in the control panel with no inner cut. I center this outline on one of the pieces. I set both outlines to cut at 90/7/1 

Step 2: Send file to laser
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
90
Speed(mm/s)
7
Pass
1
Other Parameters
Air assist

I weight down the board on the honey comb with some tiles, frame and process

Step 3: Assemble

I add glue dots to each corner and line up the edges. I tape the string of the ornament behind it and package in a clear cellophane bag that is 6x9 from Amazon 

Design Files
Packaging Backer for Ornaments.xcs
Ornaments
small business
shipping
Do you like this how-to?
Remixes (0)
Add Remix
There are no remixes yet.