In this tutorial, you will learn how to create a functional chessboard with xTool P2.
Preview
Preview
Step 1
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Pass
1
Speed(mm/s)
16
Import the file into XCS software. You'll find 4 pre-made canvases in the drawing file - chess pieces, chessboard, and chess box drawings. Arrange them in the right order on the wooden board, and once you're happy with the positioning, cut the border according to the specified size and parameters.
Step 2
Preview
Preview
Cut all the elements and assemble them together.
After assembly, it's recommended to reinforce the joints with woodworking glue.
To prevent the wooden board from turning yellow during engraving, apply a layer of decorative paper beforehand.
Import the file into XCS software. You'll find 4 pre-made canvases in the drawing file - chess pieces, chessboard, and chess box drawings. Arrange them in the right order on the wooden board, and once you're happy with the positioning, cut the border according to the specified size and parameters.
Cut all the elements and assemble them together.
After assembly, it's recommended to reinforce the joints with woodworking glue.
To prevent the wooden board from turning yellow during engraving, apply a layer of decorative paper beforehand.