When you get here you have a decision to make......could be very scary to enter....
Preview
Preview
Step 1: Design Steps1
Preview
Preview
Preview
Preview
Step 1) For this Welcome sign a broom was needed this image was brought in from the computer ina form of an SVG, it was then outlined with the outline feature
Step 2: Design step 2
Preview
Preview
Preview
Preview
Step 2) Once the outline was created text was added with a scary font, the WELCOME and IF YOU DARE were created using the text feature and the options to select the desired font.
Step 3: Design Step 3
Preview
Preview
Preview
Preview
Preview
Preview
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Pass
1
Speed(mm/s)
7
Setting 2
Process Method
Vector Laser Engrave
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
70
Pass
1
Speed(mm/s)
125
Lines per cm
100
Step 3) To continue with this I copied the text and set one set of them over the broom handle, these words were set to score for aiding in glue up afterwards, the second set were adjusted to be cut, I pre-painted a small area of wood so the lettering would be painted when they were cut out. Then once everything was engraved and cut out the lettering was an easy step to line up
Step 4: Final Placement
Preview
Preview
Preview
2 More images
Preview
Preview
Preview
Preview
Preview
Step 4) Now everything was glued together it was placed in the window of an entrance door so visitors could make their minds up to enter or not.
Step 1) For this Welcome sign a broom was needed this image was brought in from the computer ina form of an SVG, it was then outlined with the outline feature
Step 2) Once the outline was created text was added with a scary font, the WELCOME and IF YOU DARE were created using the text feature and the options to select the desired font.
Step 3) To continue with this I copied the text and set one set of them over the broom handle, these words were set to score for aiding in glue up afterwards, the second set were adjusted to be cut, I pre-painted a small area of wood so the lettering would be painted when they were cut out. Then once everything was engraved and cut out the lettering was an easy step to line up
Step 4) Now everything was glued together it was placed in the window of an entrance door so visitors could make their minds up to enter or not.