ok I know it is still August, but it was rainy and cold today so it felt like late fall. So I was inspired to make some loot bag clips like bread bag closer clips. My wife is always making loot bags for children that come for treats so this is a nice little touch.
Preview
Preview
Preview
Preview
Step 1: Design stages
Preview
Preview
Preview
Preview
Preview
Preview
Step 1) This project starts with the shape of an original bread bag clip, I created a copy of it and brought it into XCS as an SVG, I then created an oval from the insert button and added it to the bottom.
Step 2: Design stage 2
Preview
Preview
Preview
Preview
Step 2) once the clip shape and oval was put together I used the combine option to unit them to end up with a new shape.
Step 3: Adding some Text
Preview
Preview
Preview
Preview
Step 3) In this step I added text by selecting the text button I then edited the word to create the words I used, I chose a scarey font and sized the words to fit the new shape I created. NOTE: I know some spell it scary and some spell it scarey….
Step 4: Laser Time
Preview
Preview
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
Transparent Acrylic
Power(%) or Cut Pressure(g)
100
Pass
1
Speed(mm/s)
6
Setting 2
Process Method
Vector Laser Engrave
Process Material
Transparent Acrylic
Power(%) or Cut Pressure(g)
45
Pass
1
Speed(mm/s)
80
Lines per cm
100
Step 4) Once the setting were set for the cutting and the engraving the file was sent to the D1 pro so it could do it's job, I only made 3 different ones but the wording can be endless for the holiday. This adds to the loot bag with a message…..
Step 1) This project starts with the shape of an original bread bag clip, I created a copy of it and brought it into XCS as an SVG, I then created an oval from the insert button and added it to the bottom.
Step 2) once the clip shape and oval was put together I used the combine option to unit them to end up with a new shape.
Step 3) In this step I added text by selecting the text button I then edited the word to create the words I used, I chose a scarey font and sized the words to fit the new shape I created. NOTE: I know some spell it scary and some spell it scarey….
Step 4) Once the setting were set for the cutting and the engraving the file was sent to the D1 pro so it could do it's job, I only made 3 different ones but the wording can be endless for the holiday. This adds to the loot bag with a message…..