Return
Introduction
Contents
Introduction
Basic Information
Instruction
Step1: DEsign Step 1
Step2: Items Needed
Design Files
Steer Head Leather Key Chain
Cowboys all around will love this leather steer head key chain.

Preview
Basic Information
SoftwarexTool Creative Space
MachineD1 Pro
Laser Module Output Power20W
Material UsedLeather,Steel, Glue,
Material InfoLeather is from Xtool.com comes in a sheet with various colors. Spray glue and steel pins are from a hardware store.
Making Time(mins)20
Step1: DEsign Step 1

Preview

Preview
Setting 1
Process MethodLaser Cut
Process MaterialLeather
Power(%) or Cut Pressure(g)100
Pass1
Speed(mm/s)6
Image was designed in a different software, once imported to XCS software the settings were made to cut out of leather
Step2: Items Needed

Preview

Preview

Preview
3 More images
Items needed are spray glue, steel pins with bendable backing, once leather was cut both pieces were spray glued so both sides would show leather, once glued together pins were pushed thru and bent to hold the new loop to hold the key ring. A small cut leather piece was also added to cover the back of the pins. this was also spray glued and placed firmly in position.
Design Files
steer key.xcs
Do you like this how-to?
Free
Login to leave your comment
i do not have a leather pre set on my xtool d1pro??? How do i find
some material comes with pre sets or you test for your own or use mine as a guide.
Fun design. Thank you.