Projects
Designs Forum Contests
Wine Stand and engraved glass
554
6347
9
Design Files
  • Wine Glass etch.xcs
  • Wine stand 2.xcs
    • Contents
    Introduction
    Basic Information
    Instruction
    Design Files
    Stand for the 2 wine bottles and 2 glass
    Basic Information is loading...
    Step 1: cut the parts of stand
    Setting 1
    Process Method
    Laser Cut
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    100
    Speed(mm/s)
    7
    Pass
    2

    Cut all parts of wine stand as I upload xcs file.

    Step 2: assemble the parts of wine stand

    assamble all parts of wine stand.

    using the gorilla wood glue.

    used tool get from temu website.

     

     

    Step 3: Add tempera paint to wine glass

    add tempera paint to glass and let them dried.

     

    Step 4: etch the design to glass
    Setting 1
    Process Method
    Bitmap Laser Engrave
    Process Material
    Glass
    Power(%) or Cut Pressure(g)
    70
    Speed(mm/s)
    100
    Lines per cm
    100
    Pass
    1

    put the painted glass to m1.

    align horizontal and stay under meashure red light.

    add setting.

    auto measure

    and start engrave.

     

     

    Step 5: clean the paints from glass

    clean the tempera paints from glass by using the warm water.

    you can use normal water but warm water is better.

    Step 6: add golden paint to engraved design

    add the golden paint to the engraved design and wipe with paper napkin.

    Step 7: Finishing
    2 More images

    Clean all edges of wine stand by wipeout or rubbing alcohol to remove the black chacoles of laser-burned parts.

    put wine bottle and hoos the glass.

    take photo of all sides and post to xtool :D

    Thank you for your comments and likes :)

    Design Files
    Wine Glass etch.xcs
    Wine stand 2.xcs
    custom gifts
    #LongTimeContributor
    Do you like this how-to?
    Remixes (1)