Let's make some custom acrylic keychains for you and your friends!
Basic Information is loading...
Step 1
Setting 1
Process Method
Laser Cut
Process Material
Transparent Acrylic
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
4
Pass
1
Setting 2
Process Method
Bitmap Laser Engrave
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
400
Pass
1
Import the drawings into the XCS software. For the keychain drawing, we have two layers to work on. It's worth noting that the parameters that we need to adjust for each layer are different. For the cutting layer, we should select the blue light, and for the engraving layer, we should choose the IR light.
After that, click on "auto-measure", make sure that our design is properly placed on the material. Once done, begin framing by simply clicking on "process". Finally, start engraving.
Step 2
Now that we have finished the processing, all we need to do is assemble the key ring and your personalized keychain is ready to use!
NOTE
Please make sure to set the parameter correctly and select the right laser light.
Import the drawings into the XCS software. For the keychain drawing, we have two layers to work on. It's worth noting that the parameters that we need to adjust for each layer are different. For the cutting layer, we should select the blue light, and for the engraving layer, we should choose the IR light.
After that, click on "auto-measure", make sure that our design is properly placed on the material. Once done, begin framing by simply clicking on "process". Finally, start engraving.
Now that we have finished the processing, all we need to do is assemble the key ring and your personalized keychain is ready to use!
NOTE
Please make sure to set the parameter correctly and select the right laser light.