Children's Day for celebrating the lives of children. One activity that your little ones will love is making a multi-layered wood dinosaur.
Preview
Preview
Basic Information is loading...
Step 1
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
20
Pass
1
lace the wood board into the machine, import the file into XCS, and select Slats Flat mode. Click auto-measure, fine-tune the parameters, and click process to frame the cutting range. When completed, start cutting.
Step 2
Preview
Preview
After cutting is complete, place the pieces in order, with number 10 at the bottom and number 1 at the top.
Step 3
Preview
Preview
Use hot glue to fix all ten layers of the dinosaur pieces together.
NOTE
1. It's important to attach the dinosaur parts in the correct order when assembling.
2. When working with hot melt adhesive, be sure to pay close attention to the alignment before sticking the pieces together.
3. Each type of board has its own unique color, so you can choose which board to use for each layer based on your personal preference.
lace the wood board into the machine, import the file into XCS, and select Slats Flat mode. Click auto-measure, fine-tune the parameters, and click process to frame the cutting range. When completed, start cutting.
After cutting is complete, place the pieces in order, with number 10 at the bottom and number 1 at the top.
Use hot glue to fix all ten layers of the dinosaur pieces together.
NOTE
1. It's important to attach the dinosaur parts in the correct order when assembling.
2. When working with hot melt adhesive, be sure to pay close attention to the alignment before sticking the pieces together.
3. Each type of board has its own unique color, so you can choose which board to use for each layer based on your personal preference.