HomeTemplatesOffice & StationeryDesk Organization
Atomm
Report
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.

Stationary Holder

Instruction
pen holder.xcs
pen holder
.xcs
Application scenario
Laser
Machine & module
xTool M1
10W
Compatibles · 9
Material used
3mm Basswood Plywood
1193
8089
Information
      Children's Day is around the corner, make a pencil holder for your child to store their beloved stationery, and keep their table tidy!
Bill of Materials
xTool parts
atomm-bom-image
1/4" Basswood Plywood Sheets (4pcs)/44111
x1

* Currently only available in US store
Instruction
1
Step1
Preview

Import the file into XCS software and you can see that the canvas contains all the parts of the pumpkin candle holder, respectively, the sides of the pen holder, the top, and the bottom. Drag them onto the board, click auto-measure, fine-tune the parameters, and click process to frame the cutting range.

2
Step2
Preview

Burn your work. As shown in the picture, assemble the sides and bottom of the holder.

3
Step3
Preview

Assemble the top. Your pencil holder is now completed!

 

NOTE

1.Be careful when bending the sides of the pencil holder to avoid breaking the wooden board.

2.You can alternatively use acrylic material, but make sure to adjust the parameters accordingly to match the material.

 

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA