Return

Introduction
Contents
Introduction
Basic Information
Instruction
Step1
Step2
Design Files
Message Box for Wedding
I came up with a fantastic idea for the wedding reception - a collection box for all the guests to jot down their lovely messages and well-wishes for the happy couple!
Preview
Preview
Basic Information
SoftwarexTool Creative Space
MachineD1 Pro
Laser Module Output Power40W
Material UsedWood,Acrylic
Material Info3mm Walnut Plywood *3 , 3mm Basswood Plywood *1, 3mmTransparent acrylic *2, Hot melt glue
Step1
Preview
Preview
Setting 1
Process MethodLaser Cut
Process MaterialWalnut plywood
Power(%) or Cut Pressure(g)100
Pass1
Speed(mm/s)8
Setting 2
Process MethodLaser Cut
Process Material3mmTransparent acrylic
Power(%) or Cut Pressure(g)100
Pass1
Speed(mm/s)20

Place the wooden board on the D1 Pro machine, import the design, and adjust the position of the design. You are now ready to proceed.

Step2
Preview
Preview

Once the cutting is complete, assemble and secure the box using a hot glue gun or strong adhesive. 

For more details and examples, please refer to our video tutorial: https://www.youtube.com/watch?v=CG2iqG6a9X4

 

NOTE

1. When cutting the wooden board, make sure to use the Air Assist to prevent discoloration.

2. The P-series machine should be used to cut transparent acrylic as the D-series machine is not able to process this material.

Design Files
Wedding Guest Book.xcs
box
wood
wedding
gift
Do you like this how-to?
Free
Beautiful! Thank you for sharing :)
1
Reply