![[Laser cut and engrave] Caja de Papel para ocasiones especiales](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/2677b7a8-c420-43b5-9882-a6818f0eedb6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Caja de Papel para ocasiones especiales
Instruction
Information
He decided to make this box to practice and learn parameters for cutting paper, and also to use for a client who will have a 15th birthday party and will ask for a special box design, but one that would not be made of wood.
Instruction
Step1: New Project
We start by opening the work table, where we can see the layers, the red layer is for marking and making folding easier and the black layer is for cutting and also the design that has been added.
Step2: Process
After selecting the cutting and marking layers, we will proceed to start the work, in the case of the 20w xtool d1pro the process took 7 min. Sometimes the paper tends to lift up due to the wind generated by the laser, so you have to be careful to avoid any unforeseen events.
Step3: Finish
Once the process is finished, we will proceed to assemble the box, where we will fold all the marked sides and begin to glue, in the first image we see how it looks disassembled, in my opinion we should start from the top so that the bottom part is easier. And in the last image we can see how the bottom part should look before proceeding to glue it.
