Report
![[Laser cut and engrave] Snow deer and trees Winter decor for D1 Pro and M1.](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/25a7de8e-8f81-4f6e-907f-c11350ca7513?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Snow deer and trees Winter decor for D1 Pro and M1.
InstructionM1 Snow deer cut
.xcs
Application scenario
Laser (60min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Birch Plywood
206
3047
Information
Cut, paint and assemble, 3mm birch plywood used.Christmas decor.
Note: The slots on the bottom piece is made for 3mm plywood (Not applicable or fit for 5/6mm)
Instruction
1
Step1: Prepare 3mm plywood
Preview
Preview
Preview
Measure 345x290mm to be placed on the base of M1 preferably on top of honeycomb and air-assist used. Works with D1 Pro 20w setting for 20w 60% 10mm/s 1pass.
2
Step2: Spray paint White base
Preview
Preview
Preview
5 More images
Use any acrylic spray paint on the cut outs. And a slight of green on the edges. Finally top up with glitters(Decoart Twinkle writer)
3
Step3: Slot all the pieces to its respected places
Preview
Preview
Preview
Glue the bottom pieces(2 piece base). Allow 24 hours to dry.
Comments
