Ralphy Finkerton is proudly piloting a custom Bloingy 77
fighter bomber. Problem is Ralphy so learned to love his
bomb that he won't drop it.
Basic Information is loading...
Step 1: load file Ralphy.xcs
Setting 1
Process Method
Laser Cut
Process Material
2mm basswood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
3
Pass
1
Other Parameters
black layer is cut
Setting 2
Process Method
Laser Score
Process Material
2mm basswood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
15
Pass
1
Other Parameters
red layer is score
Setting 3
Process Method
Vector Laser Engrave
Process Material
2mm basswood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
80
Pass
1
Other Parameters
blue layer is engrave
Setting 4
Process Method
Laser Score
Process Material
2mm basswood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
20
Pass
1
Other Parameters
purple layer is score for small text

insure that layer (color) settings are correct for your machine and the 2mm basswood material

Step 2: load material and run file

tape down 2mm 12x12 basswood sheet with to prevent bow

orient the wood grain sideways as shown

Step 3: offload and sand

sand with 180 grit paper to remove burn

Ralphy like smooooth (also stain and urethane)

Step 4: main assembly

place 2 body pieces together back to back

insert strut into lower body slot

insert wing into body slot until it touches strut

insert cockpit into body slot until it touches wing back

insert nose into body slot until it touches strut

insert windshield into body slot until it touches nose

Step 5: final assembly

inset tail into body slot until it touches cockpit back

insert bomb tail into bomb back

place 2 wheel pieces together back to back

insert lug into center hole and insert wheel assembly onto strut

assembly prop to body with 2 prop nose pieces

Design Files
Ralphy.xcs
toy
toys
airplane
3d
wood
misfit squadron
puzzle
cartoon
Do you like this how-to?
License
This work is licensed under
Remixes (0)
Add Remix
There are no remixes yet.