A fun, quick engaging done on the F1 using the 2 Watt IR laser.
Basic Information is loading...
Step 1: Obtain Ai Image

Owl Image

There are many ways to create an image these days. With the assistance of Ai, there is no limit to what you can create!  I have used several Ai Image Generators with great success.  However, this particular image was obtained at a website called Laser-pics.com. There are hundreds of free and paid images to choose from.  The image used here is from a designer called Kasia. The link above will take you to the site, specifically to the Owl image.

Step 2: Load the File in Creative Space
Setting 1
Process Method
Bitmap Laser Engrave
Process Material
Black Opaque Glossy Acrylic Sheet
Power(%) or Cut Pressure(g)
70
Speed(mm/s)
400
Lines per cm
400
Pass
1
Bitmap mode
Jarvis
Other Parameters
Dot Duration: 400 DPI: 400
Setting 2
Process Method
Laser Cut
Process Material
Black Opaque Glossy Acrylic Sheet
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
5
Pass
1

Load the file in Creative space and set focus on your material.  The material used for this example is black glossy acrylic.

The image was loaded and then inverted. The preferred processing setting used is Jarvis.  The file contains the engraving settings and the cut settings.  Adjust as you feel necessary.

Step 3: Post Engraving

Remove the project from your F1 laser. Be careful when cleaning the project as black acrylic may easily scratch.

 

Enjoy our project!

Design Files
Wise Old Owl IR Engrave.xcs
30creatorschallenge
owl
Decore
Do you like this how-to?
License
This work is licensed under
Remixes (0)
Add Remix
There are no remixes yet.